DBX 2231, 2x31-alueinen pitkäliukuinen grafinen EQ

DBX-2231,-2x31-alueinen-pitkaliukuinen-grafinen-EQ-7DB2231-1.jpg
DBX-2231,-2x31-alueinen-pitkaliukuinen-grafinen-EQ-7DB2231-2.jpg
Tarjoustuote!
Supertarjous
Säästä 396 €
499,00 €
-44%
Ovh. 895,00 €
Heti verkkokaupan ja myymälän varastosta
Tuotetta enää muutamia kappaleita varastossa. Ole nopea!
Lähetysaika n. 1-2 arkipäivää
Toimituskulut alk. 7,90 €Nouto myymälästä: 0,00 €
 Lisää ostoskoriin
DBX 2231, 2x31-alueinen pitkäliukuinen grafinen EQ. Soundillisesti loistava, mekaanisesti mukava käyttää.
DBX 2231 2x31 alueinen taajuuskorjain / PeakPlus-masterlimitteri (895,00)
Studioon, hifisteille ja stadionkeikoille.
Kestävä ja hyvä soundinen, DBX:n paras EQ.

Overview:
It's amazing. One little button. It has so much effect. The Type III® Noise Reduction is an entirely new concept... virtually instantaneous
encode/decode within the circuitry of the box. We started out to build the finest EQ's possible, boxes with the heritage and performance
to rival our famous 30 Series EQ's. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared
to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise
reduction stuff in the box. We listened to it and were amazed. The EQ's sounded great without it but with it the performance was nothing
short of incredible. Check it out yourself and see.

But hey, Roger wasn't about to stop there. PeakPlus™ Limiter. Who knows more about limiting than the folks at dbx®; nobody... that's who.
So when the guys were developing this new series of EQ's they wanted something that would be unique to these EQ's. That's when Roger got
another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are
in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold
range of 0 to +20dbu, the PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits.
Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

20 Series EQ's. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx®
Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III® Noise Reduction.
Check out the dbx® 20 Series graphic EQ's at your pro audio outfitter. You'll see, with the 20 Series EQ's you get both MORE!!

But hey, Roger wasn't about to stop there.
PeakPlus™ Limiter.
Who knows more about limiting than the folks at dbx®; nobody... that's who.
So when the guys were developing this new series of EQ's they wanted something that would be unique to these EQ's. That's when Roger got
another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in."
Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series.
Once again, hearing is believing... With a threshold range of 0 to +20 dbu, the PeakPlus limiter is designed to tame your program material
from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

20 Series EQ's.
You used to have to settle for second best in a reasonably priced EQ but not any more.
With the new 20 Series from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new
design of the Type III® Noise Reduction.
Check out the dbx® 20 Series graphic EQ's at your pro audio outfitter.
You'll see, with the 20 Series EQ's you get both MORE!!!

- Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
- Patent-pending PeakPlus™ Limiter threshold range from 0 dBu to +24 dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
- Four segment LED bargraph for BOTH Gain Reduction AND Output Level
- Status LEDs offer visual feedback for all settings on the front panel

INPUT

Connectors:
1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced 40 kohm, unbalanced 20 kohm
Max Input Level:
>+21 dBu balanced or unbalanced
CMRR:
>40 dB, typically >55 dB at 1 kHz

OUTPUTS

Connectors:
1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Type:
Impedance-balanaced/unbalanced, RF filtered
Impedance:
Balanced 200 Ohm, unbalanced 100 Ohm
Max Output Level:
>+21 dBu balanced/unbalanced into 2 k or greater
>+20 dBm balanced/unbalanced (into 600)


SYSTEM PERFORMANCE

Bandwidth:
20 Hz to 20 kHz, +/-0.5 dB
Frequency Response:
<10 Hz to >50 kHz, +0.5/-3 dB
Noise Reduction In:
(+/-6 and +/-12 dB range)
Signal-to-Noise:
>102 dB, unweighted, ref: +4 dBu, 22k Hz measurement bandwidth
Dynamic Range:
>120 dB, unweighted
Noise Reduction Out:
(+/-6 dB range)
Signal-to-Noise:
>94 dB, unweighted, ref: +4 dBu, 22 k Hz measurment bandwidth
Dynamic Range:
>112 dB, unweighted
Noise Reduction Out:
(+/-12dB range)
Signal-to-Noise:
>90 dB, unweighted, ref: +4 dBu, 22 kHz measurement bandwidth
Dynamic Range:
>108 dB, unweighted
THD + Noise:
<0.04%, 0.02% typical at +4 dBu, 1 kHz
Interchannel Crosstalk:
<-80 dB, 20 Hz to 20 kHz
Noise Reduction:
Up to 20 dB of dynamic broadband noise reduction

FUNCTION SWITCHES

Type III® NR:
Activates dbx® Type III® Noise Reduction
EQ Bypass:
Bypasses the Graphic Equalizer section in the signal path
Low Cut (recessed):
Activates the 40Hz 18dB/octave Bessel high-pass filter
Range (recessed):
Selects either +/- 6 dB or +/-15 dB slider boost/cut range

INDICATORS

Output Level Meter:
4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18 dBu
Gain Reduction Meter:
4-LED bar graph (all Red) at 0, 3, 6, and 10 dB
Type III® NR Active:
Yellow LED
EQ Bypass:
Red LED
Clip:
Red LED
Low Cut Active:
Red LED
+/-6 dB range:
Yellow LED
+/-12 dB range:
Red LED

POWER SUPPLY

Operating Voltage:
100 VAC 50/60 Hz, 120 VAC 60 Hz
230 VAC 50/60 Hz
Power consumption:
23 W
Main Connection:
IEC receptacle

PHYSICAL

Dimensions:
5.25" H X 19" W X 7.9" D (8.9 cm x 48.3 cm x 20.1 cm)
Oletko ostanut tämän tuotteen?

Lisätiedot:
  • Takuu: 1 vuotta
  • Paino: 6.25 kg
Tuotteen toimituskulut
Nouto valitsemastasi postista 7,90 €
Nouto Postin pakettiautomaatista 7,90 €
Pikatoimitus Kotiovelle 17,80 €
Matkahuoltoon 9,90 €
Lähikauppaan 9,90 €
Nouto myymälästä 0,00 €