Sonarworks SoundID Reference w Mic kalibrointiohjelmisto + mittamikrofoni

Sonarworks SoundID Reference w Mic (369,00)
Rajoitettu tarjous!
- Sonarworks SoundID Reference for Speakers & Headphones with Measurement Microphone 
- Kalibrointiohjelmisto  + mittamikrofoni

Suositun ja arvosteluissa menestyneen Sonarworks Reference 4 -kalibrointiohjelmiston seuraaja on täällä! SoundID on entistä kehittyneempi ja käyttöominaisuuksiltaan hiotumpi kalibrointiohjelmisto etenkin studiomonitorien ja kuulokkeiden toiston sopeuttamiseen ja kalibrointiin kuuntelutilan sekä omien mieltymysten mukaan.

Sound ID Reference with Measurement Mic sisältää:

- SoundID Reference -applikaation kuulokkeille ja kaiuttimille
- SoundID Reference DAW pluginin (AU, VST, AAX) kuulokkeille
- Valmiita profiileja yli 280 eri tuetulle kuulokeparille
- SoundID Reference mittamikrofonin yksilöllisellä kalibrointiprofiililla
- Aktivointilisenssin, tuotetta  ja lisenssiä voidaan käyttää kolmella eri laitteella

Product description

A speaker and headphone calibration software delivering consistently accurate studio reference sound.

In less than 20 minutes you can calibrate your existing studio speakers with a SoundID Reference measurement microphone and calibrate your existing headphones with more than 280 headphone calibration profiles already included in the software as ready-to-use presets. With an applied calibration profile the software sets the frequency response target to be completely flat across all audible frequencies so you can make music that sounds great everywhere. You can also now make custom adjustments to the target curve in real-time with the new custom target feature.

With accurate studio reference sound, you can seamlessly switch between speakers, headphones, and rooms. Finally, ensure continuity of your workflow regardless of distance, your gear or set-up.

Key features

Speaker calibration: save as many profiles as needed
Headphone calibration profiles for 280+ supported models
Custom target: target curve adjustments in real-time
Translation Check: simulating 20+ different devices and device types for accurate mix translation results everywhere without leaving the workstation
3 filter modes: Zero Latency, Mixed and Linear Phase
Additional DSP processing controls: Mono, Dry/Wet, and Safe Headroom 
MIDI mapping in the SoundID Reference app for various controls
User Presets in the SoundID Reference app for switching quickly between predefined output device/channel pair combinations

What's included

SoundID Reference app for Speakers & Headphones
SoundID Reference DAW plugin (AU, VST, AAX) for Headphones
Averaged profiles for 280+ supported headphone models
SoundID Reference Measurement Microphone with individual calibration profile
Activation key for the product license: the product can be activated and used on 3 machines

System requirements

Mac: macOS 10.12 or later
PC: Windows 8 (64-bit) or later
Sonarworks supported or Sonarworks individually calibrated headphones
2.0 or 2.1 stereo speaker system
An audio interface featuring +48v Phantom Power and 44.1 kHz sample rate capability
Audio hardware setup must consist of a single external hardware device only during the speaker measurement process
XLR to XLR audio cable
Stable internet connection

IMPORTANT! Compatibility with Apple M1 chip machines not guaranteed

Microphone specification

    Houses pre-polarized electret-condenser capsule
    Frequency response: 20 Hz - 20kHz with supplied calibration profile
    Omnidirectional polar pattern
    Sensitivity is rated at -37dB/Pa (14 mV)
    Self noise: 24 dB
    S/N ratio: 70 dB
    Dynamic range: 106dB
    Maximum SPL: 132 dB SP