Eve Audio SC208 aktiivikaiutin

Eve Audio SC208 aktiivikaiutin
- Aktiivinen 2-tie studiomonitori
- Lähikenttä- ja mid-field sovelluksiin
- Tehokas, hyväsoundinen ja hyvällä bassovasteella varustettu aktiivikaiutin
- Kehittynyttä DSP-signaaliprossesointitekniikkaa
- AMT RS2 nauhadiskantti
- 8" SilverCone lasikuituvahvisteinen bassoelementti, 1.5" puhekela
- Taajuusvaste (- 3 dB, vapaakenttä): 36 Hz - 21 kHz
- Teho: 200 W RMS (150 W + 50 W) bi-amped
- Äänenpaine: 112 dB SPL
- DSP ohjattu volumesäätö, EQ sekä huonekorjaussäädöt (Burr-Brown 24-bit/192kHz)
- Diskantti- ja bassosäätö sekä pöytäheijastumien korjaussäädöt
- Jakotaajuus: 2800 Hz
- Sisääntulot: XLR (balansoitu), RCA (balansoimaton)
- Suojalimitteri
- Taakse aukeava refleksiportti
- Mitat: 255 x 390 x 330 mm
- Paino: 10.9 kg
- Kappalehinta.

With a larger woofer and more powerful amplifiers, the SC208 is used as a main speaker in a lot of professional and home-studios. If you're looking for a capable and detailed set of above-average size monitors try the SC208.

With the SC208, you will be able to extend your bass frequency response down to 36 Hz. Our custom-made 8" SilverCone woofer driven by a sophisticated low distortion copper cap magnet system with our 1.5" voice coil will guarantee that you will not run out of bass response when it comes to the critical listening and comparison of your mixes. The result is a very tight and dynamic bass, along with the usual greater linear excursion provided in every other EVE Audio model.

Our PWM amplifier, with protection-limiting, is able to deliver a short-term output power of 150W for a maximum output level of 112 dB (SPL @ 1m). So you can be sure that there will be plenty of power to make critical and precise judgements over your mixes.

The SC208 also uses our proprietary AMT (Air Motion Transformer) RS2. The RS2 stands for Ribbon System 2, meaning it has a bigger front plate and a larger magnet driving the motion with the utmost efficiency.

As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.

With every EVE Audio speaker, you also get high resolution DSP electronics. One push knob operation and you will have access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work.

If you always avoid digital processing, we've got you covered. The DSP engine is supported with a high quality A/D converter (24bit/192kHz) from Burr-Brown, which delivers a pristine signal to the DSP section. And since the PWM amplifiers are directly connected to the DSP, no additional conversion is necessary.