Eve Audio SC207 aktiivikaiutin

Eve Audio SC207 aktiivikaiutin
- Aktiivinen 2-tie studiomonitori
- Lähikenttä- ja mid-field sovelluksiin
- Tehokas ja hyväsoundinen aktiivikaiutin, joka soveltuu kokonsa puolesta monenlaiseen käyttöön
- Kehittynyttä DSP-signaaliprossesointitekniikkaa
- AMT RS2 nauhadiskantti
- 6.5" SilverCone lasikuituvahvisteinen bassoelementti, 1.5" puhekela
- Taajuusvaste (- 3 dB, vapaakenttä): 44 Hz - 21 kHz
- Teho: 150 W (100 W + 50 W) bi-amped
- Äänenpaine: 106 dB SPL
- DSP ohjattu volumesäätö, EQ sekä huonekorjaussäädöt (Burr-Brown 24-bit/192kHz)
- Diskantti- ja bassosäätö sekä pöytäheijastumien korjaussäädöt
- Jakotaajuus: 2800 Hz
- Sisääntulot: XLR (balansoitu), RCA (balansoimaton)
- Suojalimitteri
- Taakse aukeava refleksiportti
- Mitat: 215 x 330 x 280 mm
- Paino: 8 kg
- Kappalehinta.

The SC207 is our mid-range two-way monitor speaker and its size and form factor make them appropriate for a lot of different rooms.

The SC207 has great power efficiency that will let you clearly examine what's happening in your music. The modest and elegant size of the SC207, along with its quality precision, will make it great in your setup without overwhelming your working area.

With the SC207, you will get an extended bass frequency response (down to 44 Hz), courtesy of our 6.5" SilverCone honeycomb structured woofer and driven by a sophisticated low distortion copper cap magnet system with our 1.5" voice coil. The result is a very tight and dynamic bass, along with the usual greater linear excursion.

A PWM amplifier, with protection-limiting and capable of delivering a short-term output power of 100W, guarantees that the SC207 will never run out of juice. And with a maximum output level of 106 dB (SPL @ 1m), you can be sure that there is plenty of power to make critical and precise judgements over your mixes.

The SC207 is also the first EVE model monitor that uses our proprietary AMT (Air Motion Transformer) RS2. That means it can deliver a higher output level that is due to a bigger magnet system inside.

As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.

With every EVE Audio speaker, you also get high resolution DSP electronics. One push knob operation and you will have access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work.

And if you always avoid digital processing, we've got you covered. The DSP engine is supported with a high quality A/D converter (24bit/192kHz) from Burr-Brown, which delivers a pristine signal to the DSP section. And since the PWM amplifiers are directly connected to the DSP, no additional conversion is necessary.